| |
Unique Home Furniture, Home Decorating and Home Decoration Store
Use Small Specimens: a General Test Use small specimens are to be taken longitudinally and of the full thickness or section of material as rolled, except as otherwise specified.
b Test Use small specimens Test Use small specimens are to receive no other preparation than that prescribed and are to similarly and simultaneously receive all the treatment given the material from which they are cut, except as otherwise specified. Straightening of Use small specimens distorted by shearing is to be carried out while the piece is cold.
c Use small specimens from Plates Over 38.1 mm (1.5 in.) Thickness For plates over 38.1 mm (1.5 in.) in thickness, tension test Use small specimens may be machined to the form and dimensions shown in Figure 44.2, and the axis of each such specimen is to be located midway between quircments, two additional Use small specimens may, at the request of the manufacturer, be taken from the same plate and tested in the manner specified, but in such case, both of the Use small specimens are to conform to the requirements (see 44.1.x:). If a bend test specimen fails clue to conditions of bending more severe than required by the specification, a retest is to be permitted, either on a duplicate specimen or on a remaining portion of the failed specimen.
b Use small specimens from Plates 38.1 mm (1.5 in.) and Under in Thickness For plates 38.1 mm (1.50 in.) and under in thickness, tension and bend test Use small specimens are to be the full thickness of the material and are to be machined to the form and dimensions shown in Figure 44.1, or with both edges parallel. The sides of the bend test Use small specimens may have rounded corners in accordance with 44.1.6g.
|
|
|
 |
Child-Education-Usa.com |
|
 |
 |
|
Menu |
|
|
| |
| |
|
|
| |
|
